LeftField 3 Expert Kit for RED V-RAPTOR (Movi Pro)

The Left Field ARRI Dovetail Plate is a quick release cheese plate that is compatible with the Left Field 15mm LWS Baseplate and Sliding Top Plates.

• Versatile quick release plate for camera or top mounted accessories
• Ability for fine adjustment of counter balance
• Multiple 1/4", 3/8" & ARRI Accessory Mounts
• Removable safety screws to prevent sliding out
• Option to place the Dovetail Plate into fixed position with safety screws

Upgrade your production with the LeftField 3 15mm LWS Quick Release Baseplate Core, streamlining your filming workflow and helping you accomplish more in less time.

Add a riser for your compatible camera and securely lock onto any ARRI standard balance plate or dovetail.

With support for 15mm rod support, you can outfit your camera for any cinematic challenge.

• Compatible with multiple camera systems using LeftField risers, setting correct 15mm LWS height and spacing.
• Safe and reliable Open•UP quick release system
• Compatible with LeftField 3 & ARRI standard balance plates
• Compatible with KASBAH shoulder pad
• Mounts onto any ARRI standard bottom plate & LeftField 3 balance plates

Add a perfectly balanced carrying handle to your camera setup. The sliding bar allows you to set the balance point for a comfortable grip.

It mounts to the Top Plate QR Dovetail for quick setup changes with additional mounting points for the Top Bar Bracket to add 15mm rods.

• Multiple accessory mounting points - 3/8" AT, 1/4"-20 & cold shoe.
• Adds QD (Quick Detach) sockets for use with camera straps & anchors
• Adjustable handle bar to slide fore/aft for optimal balance point.
• Mounts directly to Top Plate QR Dovetail for quick setup changes & less downtime.
• Provides additional mounting point for RED V-RAPTOR Top Bar Bracket.

Add the Top Plate to your RED V-RAPTOR to easily mount accessories & gimbal cross bar mounts.

Quick release the dovetail for faster transitions with full clearance of the RED Monitor Interface & helicoil reinforced threads.

• Spring loaded quick release dovetail secured with 4mm hex key with safety release & safety stops.
• Dead Lock secures dovetail plate in place, creating fixed top plate.
• 10mm hole depth prevents accessories bottoming out & maximises thread engagement
• Compatible with DJI Ronin 2 & Freefly Mōvi Pro mounting plates along centre or offset to sides.
• Helicoil reinforced mounting points for top handle points & central threads for extra durability.
• Vents maintain air flow from cooling fan
• Provides attachment points for right side horse shoe plate for an extra rigid build

Mount 15mm rods on the top of your RED V-RAPTOR. The two piece bracket attaches onto the RED Monitor Interface monitor mount to provide a simple solution for an EVF mount, lens motors or other accessories.

The USB-C socket remains available to connect the DSMC3™ RED Touch 7.0” LCD monitor.

• Mounts onto the RED Monitor Interface monitor mount with two screws
• Supports two standard 15mm rods with individual locks.
• Can also be mounted to B4002.1052 Top Handle removing need for RED Monitor Interface.
• Useful for mounting EVF bracket, lens motors & other accessories.
• Bracket can be rotated for high or low mode to suit a wide range of configurations.

Add secure mounting & rigging points to the RED V-RAPTOR.

Attaching directly to the RED V-RAPTOR, the Right Side Plate provides two 3/8" anti-twist & four 1/4" mounting points for accessories and an ARRI standard rosette for attaching handles & grips as well as a film plane hook relocation point.

• Adds 2x 3/8" Anti-Twist & 4x 1/4"-20 threaded points with ARRI standard spacing.
• Machined ARRI standard rosette for attaching handles & grips.
• Easily accessible film plane relocation point.
• Can be used inverted to suit camera configuration.

Add secure mounting & rigging points to the RED V-RAPTOR.

Attaching directly to the RED V-RAPTOR, the Left Side Plate provides two 3/8" anti-twist & four 1/4" mounting points for accessories and an ARRI standard rosette for attaching handles & grips.

• Adds 2x 3/8" Anti-Twist & 4x 1/4" threaded points with ARRI standard spacing.
• Machined ARRI standard rosette for attaching handles & grips.
• Can be used inverted to suit camera configuration.

Relocate your DSMC3™ RED Touch 7.0" LCD monitor with the V-RAPTOR monitor mount.

When mounting to the LeftField Top Handle, the monitor remains centered to the camera.

• Provides mounting point for DSMC3™ RED Touch 7.0” LCD monitor mount
• Standard 3/8" Anti-twist point with locating pins
• Monitor remains centered to the camera when mounting on the RED V-RAPTOR Top Handle
• Can be rotated to by moving locating pins to desired angle
• Milled from a single piece of high-grade aluminium for strength & durability.

Quick release between the LeftField 15mm LWS Baseplate and the Freefly Mōvi Pro without changing plates.

Lens adapters can be supported using the included 3/8" or 1/4" screw.

• Slides onto LeftField 15mm LWS Baseplates with Mōvi Pro Risers.
• Compatible with Freefly Mōvi Pro gimbal.
• Lens adapters can be secured using front slot with included 3/8" or 1/4" screw.
• 2x M3 points to mount Freefly MōVI Rod Mount Adapter.
• Shuttle slides fore/aft to balance camera and keeps screws captive.
• Wide platform for stability with rubber pads for grip.

Set the RED V-RAPTOR to the correct height when using the LeftField 15mm LWS Baseplate & Mōvi Pro Camera Plate.

The quick release allows for fast transitions between tripod & gimbal work without needing to change plates.

• Sets RED V-RAPTOR to 15mm LWS height standards when using B4002.1061 Movi Pro Camera Plate for RED V-RAPTOR
• Compatible with other Movi Pro camera plates (height may vary between plates)
• Interchangeable with other LeftField Baseplate Risers
• Integrated safety prevents accidental release, secured with 4mm Hex key.

Rig & accessorise your RED V-RAPTOR with the Right Side Horse Shoe. The ‘C’ structure is extremely rigid and has multiple 3/8" AT & 1/4" threads for attaching accessories.

• Provides multiple 3/8" Anti-Twist & 1/4"-20 accessory points for rigging
• C-Beam design provides an extremely rigid & secure structure.
• Helicoil reinforced threads prevents threads from stripping & loosening over time
• Mounting point to relocate Film Plane Hook
• Mounts directly to the V-RAPTOR, with option to mount to Top Plate for an extra rigid build.
• Maintains compatibility with Right side plate using included screws.