LeftField 3 Sony VENICE 1 & 2 – Advanced Kit

Add a quick-release base with support for 15mm rods with the 15mm LWS Baseplate for Sony VENICE 1 & 2. Using the patented Open•UP Quick Release System, you can quickly change from handheld shooting to tripod in seconds.

Reliably mount to any ARRI standard dovetail or dovetail plate with a vertical release.

• Open•UP Quick-Release lets you slide, lock & vertically release the camera
• Compatible with any ARRI standard dovetail with auto-calibration.
• Front & rear 15mm rod clamps.
• Compatible with Sony VENICE standard or split risers set cameras to 15mm LWS height standard.
• Precision cut from a single block of high-grade aluminium billet.

This riser comprises of two parts and sets the Sony VENICE 1 & 2 to 15mm LWS standards when combined with B4003.1030 15mm LWS Baseplate for Sony VENICE 1 & 2.

The split design allows the cage to quickly detach from the baseplate, creating a low profile design for easier balancing on gimbals & steadicam without complete disassembly.

• Consists of upper & riser plates setting 15mm LWS height standard with the baseplate core.
• Forms a rigid cage when combined with side & top plates
• Speeds up setup changes with detachable riser plate, creating a low profile setup for gimbal & steadicam work
• Camera can be adjusted fore/aft on baseplate for optimal balance with locating pins ensuring proper alignment

The Top Plate for Sony VENICE 1 & 2 provides a sliding, quick‑release platform for interchangeable dovetails, providing multiple support & accessory mounting options. Pre-configured dovetails can be set up for top handles, gimbal mounts & more.

The front features 15mm LWS rod support for EVFs & lens motors.

• Mounts to the top of Sony VENICE 1 & 2, combines with side & bottom plates to form a rigid cage.
• Interchangeable dovetail plates can be preconfigured plates for handles, gimbal mounts & more
• ARRI standard clamp can be used for dovetail plates or balance plates for underslung setups with multiple safety mechanisms to prevent any accidental release.
• Provides multiple 3/8" Anti-twist & 1/4" threads and position for film plane hook on each side.
• 15mm rod mount can be used for EVF mounts, lens motors & other accessories with adjustable vertical position for LWS or low mode. Can also be removed completely if needed.

Add the Right Side Plate for secure mounting & rigging points on the Sony VENICE 1 & 2.

It attaches to the B4004.1020 Sliding Top Plate & B4004.1024 Split Riser. Combining with B4004.1022 Left Side Plate, it forms a rigid cage around the camera.

• Right Side Plate for the Sony VENICE 1 & 2
• Locating pins enable fast installation & removal using only two screws.
• Adds multiple rigging points with 3/8" Anti-Twist, 1/4-20" threads and ARRI standard rosette.
• Provides full clearance for Wooden Camera D-Box™ (Sony VENICE 1 & 2).
• Requires B4004.1020 Sliding Top Plate & B4004.1024 Split Riser
• Precision cut from high-grade aluminium & anodised for durability.

Add the Left Side Plate for secure mounting & rigging points on the Sony VENICE 1 & 2.

It attaches to the B4004.1020 Sliding Top Plate & B4004.1024 Split Riser. Combining with B4004.1021 Right Side Plate, it forms a rigid cage around the camera.

• Left Side Plate for the Sony VENICE 1 & 2
• Locating pins enable fast installation & removal using only two screws
• Adds multiple rigging points with 3/8" Anti-Twist, 1/4-20" threads and an ARRI standard rosette.
• Low profile design maintains full access to button interface.
• Requires B4004.1020 Sliding Top Plate & B4004.1024 Split Riser

Drumstix Sterling Titanium Support Rods are like no other rods. With featherweight mass, and rock solid support, they will change the way you film. Be dextrous. Be agile. Be free. We let you focus on what’s important, so you never miss a beat.

• Quarter of the weight of stainless steel rods
• Won’t bend like aluminium or shatter like carbon fibre rods
• Manufactured to high British standards with twenty microns of tolerance
• Available in 15mm or 19mm in a range of lengths
• lifetime warranty

View 19mm Drumstix Support Rods

Save time adjusting your EVF position with the Axl EVF mount. The single locking screw gives you fast and easy adjustment of your EVF with one hand.

• The 3-Axis knurled locking screw gives you fast and easy adjustment of your EVF with one hand.
• The Drop-free design of the Axl won't allow your EVF to flop down, even when completely loosened.
• Integrated rotation limiters on the tilt adjustment, keep the tightening screw always accessible.
• Use your Axl with a wide range of EVF's by adding more adaptors to your kit.
• Built with high-grade aluminium & anodised for durability.
• A minimal and compact design for clutter-free camera builds.

This adapter lets you use the Sony DVF-EL200 Viewfinder with the Axl EVF mount.

• Quick-releases onto the Sony DVF-EL200 for use with the Axl EVF Mount
• CNC cut & hard-anodised

Quick release on & off the ARRI BP-8 or BP-9 Studio Bridge Plates when using the LeftField 15mm LWS Baseplate for Sony VENICE 1 & 2.

The dovetail plate lines up to the mounting screws & locating pins for a reliable & secure mount.

• For use with B4003.1030 15mm LWS Baseplate for Sony VENICE 1 & 2
• Compatible with ARRI K2.0031436 BP-8 or K2.0031435 BP-9 Bridge Plates
• Sets camera to correct optical height for 15mm Studio or 19mm Studio configurations.
• Safety stops prevent accidental release
• Helicoil reinforced threads prevents stripping and loosening over time

Compact yet comfortable, the D-Style Master Handle is the perfect lightweight top handle for your camera rig. Featuring a non-slip rubber texture and a contoured grip, the handle is ergonomically designed to be easy to hold but hard to drop.

Featuring ARRI Pin-Lock standard threads and QD sockets for accessory mounting, the D-Style Master Handle is a versatile addition to your camera setup.

• Highly Compatible –The handle is compatible with any top plate or dovetail with two 3/8” points spaced between 14 to 74mm apart.
• Ergonomic Grip – A textured rubber inlay on the handle ensures a firm grip.
• Customisable – With ARRI-standard threads on the top and sides, as well as Quick-Detach sockets, you can add a range of accessories to the handle.
• Closed-Loop – The distinctive D-shape of the handle provides a closed grip for extra support.
• Handle Extensions – Matches perfectly with Master Handle Extensions