$1,599Original price was: $1,599.$1,279.20Current price is: $1,279.20.
Unlock the full potential of your Sony Rialto Extension Unit with our sturdy cage, providing a stable base for all your filmmaking endeavours.
Equipped with a robust frame, quick-release dovetails, along with a 15mm LWS baseplate and rear cheese plate, this cage offers a solid foundation for any camera setup you can imagine.
Our Advanced kit includes the sliding top plate, side plates, split riser, 15mm LWS baseplate, top handle, and rear cheese plate.
Configurable for any rigging situation from handheld, hard mount or gimbal
Complete flexibility in mounting accessories with threaded points, ARRI rosettes, quick-release dovetails & 15mm rod supports
Baseplate can be detached, creating a compact setup with the low profile cage
Compatible with ARRI standard dovetails, hand grips, arms & more
Unlock the full potential of your Sony Rialto Extension Unit with our sturdy cage, providing a stable base for all your filmmaking endeavours.
Rugged Cage Foundation
The sleek and low-profile cage will become a permanent fixture on your Rialto, providing a sturdy foundation for your rigging needs.
Fast Setup Changes
Switch effortlessly between gimbal and handheld modes or switch out handles and support accessories in a matter of seconds with our quick-release dovetail plates.
These low profile dovetails are equipped with helicoiled 3/8″-16 and ¼”-20 threads, specifically designed to fit Freefly Systems Mōvi and DJI Ronin 2 gimbal systems.
They also offer compatibility with various top handles, giving you the flexibility to customise according to your requirements. With a hole depth of 10mm, each thread provides excellent support and engagement for all your accessories.
Enhanced Safety Measures
Experience maximum reliability and safety on set with the addition of multiple safety mechanisms. Our safety feature prevents the clamp from opening fully, giving you peace of mind even in fast-paced situations.
To completely lock off the dovetail, the deadlock screw can be engaged, anchoring the dovetail plate into the central position.
Snap On, Snap Off
The Open•Up quick-release features a three-stage design which lets you securely locks the baseplate in place, slide for balance & lift off vertically. The baseplate automatically calibrates to any ARRI standard dovetail, even those that our out of tolerance and is also compatible with the LeftField Dovetail Plate for smaller setups.
If you need to run the Rialto underslung, simply clamp an ARRI dovetail into the top plate.
Limitless Possibilities
Featuring anti-twist 3/8″-16 and 1/4″-20 threads, ARRI standard rosettes, and 15mm rod support on both the top and bottom, you can set up the Rialto to suit any situation. The ample surface area of the rear cheese plate allows you to easily attach your wireless receivers and much more.
Easy to assemble with captive screws
Get ready to assemble the kit in no time! You will require a 4mm Hex Key and a flat screwdriver. And no need to stress about losing any screws – they’re all captive.
Easy to assemble with captive screws
Get ready to assemble the kit in no time! You will require a 4mm Hex Key and a flat screwdriver. And no need to stress about losing any screws – they’re all captive.
Compatibility
The Advanced Kit is compatible with the Sony Rialto 1 & 2.
What’s Included
The Advanced kit includes the sliding top plate, top dovetail, 15mm bracket, top handle, left & right side plates, split riser, LeftField 3 15mm LWS baseplate, dovetail plate & rear cheese plate.
Part of the LeftField System
Create your perfect setup for the Sony Rialto using our LeftField System. Explore a wide selection of accessories to enhance your rig and tailor it to your specific requirements.
Zero Compromises
Absolutely no compromise has been made in our manufacturing process. Our engineering is focused on creating products that are both high-performance and enabled with a longer life of service. Combine that with unparalleled level of Bright Tangerine support.
The Top Plate for the Sony Rialto Extension Unit adds a sliding, quick-release platform. This allows you to easily switch between interchangeable dovetails, giving you endless support and accessory mounting possibilities. Whether you need a top handle, gimbal mount, or more. It even offers underslung modes using ARRI standard dovetails for added flexibility.
The front of this Top Plate features 15mm LWS rod support, and when combined with the side plates and baseplate, it creates a sturdy cage.
Mounts to the top of Sony Rialto Extension Unit and combines with side & bottom plates to form a rigid cage.
Interchangeable dovetail plates can be preconfigured for handles, gimbal mounts & more
ARRI standard clamp can be used for dovetail plates or balance plates for underslung setups with multiple safety mechanisms to prevent any accidental release.
Provides multiple 3/8″ Anti-twist & 1/4″ threads and position for film plane hook on each side.
15mm rod mount can be used for EVF mounts, lens motors & other accessories with adjustable vertical position for LWS or low mode. Can also be removed completely if needed.
In stock
Left Side Plate for Sony Rialto 1 & 2
Enhance your Sony Rialto with the Left Side Plate for the Sony Rialto Extension System for VENICE.
This plate attaches to the B4004.1030 Sliding Top Plate & B4004.1033 Split Riser. When combined with the B4004.1032 Right Side Plate, it creates a solid cage that provides a strong base for building up your system.
Creates a strong, stable cage to rig your Sony Rialto System
Adds a range of mounting points & ARRI standard rosette for hand grips
Low profile to stay on the system for compact builds
Attaches to B4004.1030 Sliding Top Plate & B4004.1033 Split Riser
In stock
Right Side Plate for Sony Rialto 1 & 2
Enhance your Sony Rialto with the Right Side Plate for the Sony Rialto Extension System for VENICE.
This plate attaches to the B4004.1030 Sliding Top Plate & B4004.1033 Split Riser. When combined with the B4004.1031 Left Side Plate, it creates a solid cage that provides a strong base for building up your system. It can also be used to set up the Rialto in portrait mode.
Creates a strong, stable cage to rig your Sony Rialto System
Adds a range of mounting points & ARRI standard rosette for hand grips
Lets you set up the Rialto in portrait mode with additional mounting point
Low profile to stay on the system for compact builds
Attaches to B4004.1030 Sliding Top Plate & B4004.1033 Split Riser
In stock
Sony Rialto 1 & 2 Split Riser for 15mm LF3 baseplate
This riser comprises of two parts and sets the Sony Rialto Extension Unit to 15mm LWS standards when combined with B4003.1034 LeftField 3 15mm LWS Baseplate.
The split design allows the cage to quickly detach from the baseplate, creating a low profile design for easier balancing on gimbals & Steadicam without complete disassembly.
Consists of upper & riser plates setting 15mm LWS height standard with the baseplate core.
Forms a rigid cage when combined with side & top plates.
Speeds up setup changes with detachable riser plate, creating a low profile setup for gimbal & Steadicam work.
Camera can be adjusted fore/aft on baseplate for optimal balance with locating pins ensuring proper alignment.
In stock
Sony Rialto 1 & 2 Rear Mounted Cheese Plate
Introducing the Rear Mounted Cheese Plate for the Sony Rialto. Easily attaching to the back of the extension unit, adding a variety of threaded mounting options for all your accessories.
Plus, take advantage of the two channel slots that offer even more possibilities for accessories and efficient cable management.
Provides a large flat surface to the back of the Sony Rialto Extension Unit.
Two channel slots can for clean cable routing and management.
Attaches securely using the four included captive screws.
In stock
15mm LWS Baseplate Core for Sony VENICE 1 & 2
Add a quick-release base with support for 15mm rods with the 15mm LWS Baseplate for Sony VENICE 1 & 2. Using the patented Open•UP Quick Release System, you can quickly change from handheld shooting to tripod in seconds.
Reliably mount to any ARRI standard dovetail or dovetail plate with a vertical release.
Open•UP Quick-Release lets you slide, lock & vertically release the camera
Compatible with any ARRI standard dovetail with auto-calibration.
Front & rear 15mm rod clamps.
Compatible with Sony VENICE standard or split risers set cameras to 15mm LWS height standard.
Precision cut from a single block of high-grade aluminium billet.
In stock
Sliding Top Handle
Enhance your camera setup by adding the Sliding Top Handle for optimal balance. Adjust the handlebar to fine-tune weight distribution for better camera control.
Mounting points offer versatile options for supporting monitors, rod brackets, and QD straps.
Sliding handle bar with safety stops for adjusting balance
