$999Original price was: $999.$799.20Current price is: $799.20.
Introducing the Rear Mounted Cheese Plate for the Sony Rialto. Easily attaching to the back of the extension unit, adding a variety of threaded mounting options for all your accessories.
Plus, take advantage of the two channel slots that offer even more possibilities for accessories and efficient cable management.
Provides a large flat surface to the back of the Sony Rialto Extension Unit
Transform your Sony Rialto Unit with our Rear Mounted Cheese Plate. Enhance your setup with a spacious and versatile flat surface, ideal for hassle-free accessory mounting and efficient cable management.
Versatile Accessory Mounting
With 3/8″-16 anti-twist, 1/4″-20, and two channel slots, you’ll have endless possibilities for mounting your accessories.
Spacious & Flat
The Cheese Plate mounts on the back of the extension unit, clearing the rear bump, offering a broad surface for attaching accessories like wireless receivers.
Easy Assembly
Using a 4mm Hex Key, secure the cheese plate to the Rialto using the four captive screws.
Create your perfect setup for the Sony Rialto using our LeftField System. Explore a wide selection of accessories to enhance your rig and tailor it to your specific requirements.
Zero Compromises
Absolutely no compromise has been made in our manufacturing process. Our engineering is focused on creating products that are both high-performance and enabled with a longer life of service. Combine that with unparalleled level of Bright Tangerine support.
The Top Plate for the Sony Rialto Extension Unit adds a sliding, quick-release platform. This allows you to easily switch between interchangeable dovetails, giving you endless support and accessory mounting possibilities. Whether you need a top handle, gimbal mount, or more. It even offers underslung modes using ARRI standard dovetails for added flexibility.
The front of this Top Plate features 15mm LWS rod support, and when combined with the side plates and baseplate, it creates a sturdy cage.
Mounts to the top of Sony Rialto Extension Unit and combines with side & bottom plates to form a rigid cage.
Interchangeable dovetail plates can be preconfigured for handles, gimbal mounts & more
ARRI standard clamp can be used for dovetail plates or balance plates for underslung setups with multiple safety mechanisms to prevent any accidental release.
Provides multiple 3/8″ Anti-twist & 1/4″ threads and position for film plane hook on each side.
15mm rod mount can be used for EVF mounts, lens motors & other accessories with adjustable vertical position for LWS or low mode. Can also be removed completely if needed.
In stock
Left Side Plate for Sony Rialto 1 & 2
Enhance your Sony Rialto with the Left Side Plate for the Sony Rialto Extension System for VENICE.
This plate attaches to the B4004.1030 Sliding Top Plate & B4004.1033 Split Riser. When combined with the B4004.1032 Right Side Plate, it creates a solid cage that provides a strong base for building up your system.
Creates a strong, stable cage to rig your Sony Rialto System
Adds a range of mounting points & ARRI standard rosette for hand grips
Low profile to stay on the system for compact builds
Attaches to B4004.1030 Sliding Top Plate & B4004.1033 Split Riser
In stock
Right Side Plate for Sony Rialto 1 & 2
Enhance your Sony Rialto with the Right Side Plate for the Sony Rialto Extension System for VENICE.
This plate attaches to the B4004.1030 Sliding Top Plate & B4004.1033 Split Riser. When combined with the B4004.1031 Left Side Plate, it creates a solid cage that provides a strong base for building up your system. It can also be used to set up the Rialto in portrait mode.
Creates a strong, stable cage to rig your Sony Rialto System
Adds a range of mounting points & ARRI standard rosette for hand grips
Lets you set up the Rialto in portrait mode with additional mounting point
Low profile to stay on the system for compact builds
Attaches to B4004.1030 Sliding Top Plate & B4004.1033 Split Riser
In stock
Sony Rialto 1 & 2 Split Riser for 15mm LF3 baseplate
This riser comprises of two parts and sets the Sony Rialto Extension Unit to 15mm LWS standards when combined with B4003.1034 LeftField 3 15mm LWS Baseplate.
The split design allows the cage to quickly detach from the baseplate, creating a low profile design for easier balancing on gimbals & Steadicam without complete disassembly.
Consists of upper & riser plates setting 15mm LWS height standard with the baseplate core.
Forms a rigid cage when combined with side & top plates.
Speeds up setup changes with detachable riser plate, creating a low profile setup for gimbal & Steadicam work.
Camera can be adjusted fore/aft on baseplate for optimal balance with locating pins ensuring proper alignment.
In stock
Sliding Top Handle
Enhance your camera setup by adding the Sliding Top Handle for optimal balance. Adjust the handlebar to fine-tune weight distribution for better camera control.
Mounting points offer versatile options for supporting monitors, rod brackets, and QD straps.
Sliding handle bar with safety stops for adjusting balance
